Home

Custom CNC Machining Solution for Medical Device Spare Parts

1. Medical-Grade Certified Precision & Compliance
Delivers ultra-tight tolerances down to ‌±0.001mm‌, fully compliant with ISO 13485 medical manufacturing standards, meeting the strictest safety requirements for surgical instruments and diagnostic equipment .
Every production step follows FDA-aligned quality protocols, with zero cross-contamination risks during machining of medical spare parts.
2. Full Biocompatible Material Compatibility
Supports precision machining of medical-grade titanium, 316L stainless steel, PEEK and other biocompatible materials, with 100% traceable raw material sourcing for every batch .
Optimized cutting parameters eliminate residual stress, ensuring parts maintain stable mechanical performance even in long-term clinical contact scenarios.
3. Burr-Free Ultra-Smooth Surface Finishing
Implements 7-step precision polishing processes, achieving surface roughness as low as Ra0.05μm with absolutely no sharp edges or hidden burrs .
Smooth, non-irritating surfaces prevent tissue damage during surgical procedures and avoid residual contamination in diagnostic equipment.
4. Complex Geometry One-Clamping Forming
Equipped with 5-axis medical-specific CNC centers, completing multi-angle milling, micro-hole drilling and curved surface forming in a single setup .
Perfectly handles intricate structures like endoscopic tool assemblies, orthopedic implant components and miniaturized sensor mounts that traditional machining cannot achieve .
5. Rapid Iteration from Prototyping to Mass Production
AI-driven instant DFM feedback cuts design validation cycles by over 50%, supporting fast custom prototyping for patient-specific medical devices .
Seamlessly scales from 1-piece trial production to 100,000+ batch manufacturing, with consistent precision across every production run.
6. Full-Process Traceability & Professional Support
Provides complete inspection reports including CMM dimensional verification, material certification and biocompatibility test data for every component .
Our medical engineering team offers dedicated DFM optimization guidance, helping you reduce part manufacturing costs by up to 30% while meeting regulatory requirements.

Message

Product Description

Product Description

Custom precision metal parts for surgical instruments, diagnostic and rehabilitation medical equipment.

We select reliable medical-grade raw materials and implement rigorous multi-step polishing processes throughout production.Strict dimensional tolerance control, smooth burr-free surface finishing and professional surface treatment are applied for each component,fully complying with stringent medical industry safety standards.

Our precision metal components feature excellent biocompatibility, corrosion resistance and stable mechanical performance, well suited for complex clinical and medical device application scenarios.

Specification

Most Popular Electroplating Medical Precision Hardware Accessories for Laboratory Instrument

One-stop Custom Precision CNC Machining Service
Manufacrure
Material	Aluminum (6061-T6, 6063, 7075-T6,5052) etc... Brass/Copper/Bronze etc... Stainless Steel (302, 303, 304, 316, 420) etc... Steel (mild steel, Q235, 20#, 45#) etc... Plastic (ABS, Delrin, PP, PE, PC, Acrylic) etc...
Process	CNC Machining, CNC turning, CNC milling, CNC lathe machining, CNC boring, CNC grinding, CNC drilling etc...
Surface treatment	Clear/color anodized; Hard anodized; Powder-coating; Sand-blasting; Painting; Nickel plating; Chrome plating; Zinc plating; Silver/gold plating; Black oxide coating, Polishing etc...
Gerenal Tolerance (+/-mm)	CNC Machining: 0.005 Turning: 0.005 Grinding(Flatness/in2): 0.003 ID/OD Grinding: 0.002 Wire-Cutting: 0.002
Certification	ISO9001:2005
Experience	20 years of CNC machining products 3 years of automation machine manufacturing
Production capacity	depend on complicacy of different products and the quantity
Packaging	Standard: pearl cotton and bubble bag, carton box and seal For large and big quantity: pallet or as per customers' requirement
Lead time	In general:7-14days
Term of Payment	T/T, Paypal, Trade Assurance etc...
Minimum Order	Comply with customer's demand
Delivery way	Express(DHL,Fedex, UPS,TNT,EMS), By Sea, By air, or on your requirement

CNC MACHINING SERVICE

CNC Turning,CNC Milling,CNC Laser Cutting

Our CNC turning and milling services canproduce highly accurate and complex partsfrom a variety of materials, including metals,plastics and composites.
Samples: 1-3 Day
Lead time:7-14Day
Machinery Axis: 3,4,5,6
Tolerance:+/-0.01mm
Special Areas :+1-0.002mm
Surface Roughness: Ra 0.1~3.2
supply Ability:200,000Piece/Month.

Our CNC milling capabilities allow us to produce precise and complex components from various materials including aluminum, stainless steel, brass, engineering plastics, and more.
Machinery Axis: 3, 4, 5
Processing Range: Length 5–1500mm
Tolerance: ±0.01mm
High Precision Zones: ±0.002mm
Surface Finish: Ra 0.4–0.05
Materials: Metals, Plastics, Composites
Quality Assurance: In-house QC team, Full inspection, Process FMEA, CPK control

Our CNC laser cutting services deliver fast, clean, and precise cuts on sheet metals and non-metal materials. Ideal for prototypes, custom parts, and high-volume production with minimal material waste.
Cutting Thickness: 0.1 – 25mm (material-dependent)
Materials: Stainless Steel, Carbon Steel, Aluminum, Brass, Acrylic, Plastics
Cutting Tolerance: ±0.1mm
Max Sheet Size: Up to 3000 × 1500mm
Edge Quality: Smooth, burr-free finish
Applications: Enclosures, signage, brackets, precision plates

Professional CNC Machining Manufacturer with Proven Strength

With over20 years of precision machining experience, we are equipped with advanced multi-axis CNC centers and a skilled engineering team. Our commitment to quality, efficiency, and custom solutions makes us a trusted partner for global OEM clients across various industries.

Company Profile

FAQ

Q1. What is your product range?
A.1.CNC machining parts, precision parts, CNC parts, metal machining parts.
2.CNC turning parts, CNC turned parts,Lathe parts, turned parts.
3.CNC milling parts, CNC milled parts, metal milling parts.
4.CNC machined parts,CNC machine part, CNC machinery parts.
5.Metal parts, Auto parts, mechanical parts.spare parts,accessories,hardware.
6.Die casting parts,aluminum casting parts, Zinc casting parts.
7.Die stamping parts, metal stamping parts, press stamping tooling
8. Sheet metal fabrication, bending parts, laser cutting parts, welding parts

Q2. How to get a quote?
A. Detailed drawings (PDF/STEP/IGS/DWG), including quality, delivery date, materials, quality, quantity, surface treatment and other information.

Q3. Can I get a quotation without drawings?
A.Please send your sample to our factory, then we can copy or provideyou better solutions Please send us pictures or drafts with dimensions(Length,Height,Width),CAD or 3D file will be made for you if placed order.

Q4. How can you keep track of your order's production and delivery progress?
A.You may contact our sales coordinator anytime to check your order progress. We will update you in real time on every production stage including material cutting, machining, surface treatment, quality inspection, packaging and shipment. Video and photo progress reports are available upon request.

Q5. What is the delivery date?
A.Generally, the sample lasts for 7-10 days and the batch production lasts for 2-3 weeks.(Accurate delivery time depends on specific items and quantities)

Q6. How do you control quality?
A.(1) Material Inspection - Check material surfaces and approximate dimensions.
(2) First inspection of production - ensure critical dimensions in mass production.
(3) Sampling inspection - check the quality before delivery to the warehouse.
(4) Preshipment inspection - 100% inspection by QC assistant before shipment

Q7. What is your standard PO procurement process flow ?
A.Prototyping> FA approval >Quality Control Plan >Manufacturing Process Instruction >Batch Production > Inspection >Shipping

Q8.How can we guarantee the safety and confidentiality of your design drawings?
A.We strictly implement confidential management for all customer drawings, prohibit unauthorized disclosure and use, and will never share your design data with any third party. All design files are kept encrypted and archived to fully protect your intellectual property rights.

None

Online Message

Professional service team answers